Siemens SINAUT MD720-3 System Manual page 33

ATS0 Configures Automatic answering
Executive command
Command: ATS0=<n>
Response: OK
Parameter: <n>:
0:
1-255:
Notice: GSM networks usually generate only 8-12 RING. If S0 is set to a higher value, calls are
eventually not being answered.
ATV Set result code format mode
Executive command
Command: ATV[<value>]
0 When numeric code is activated
Response:
OK When verbose code is activated
Parameter: <value>:
0 Information
Result Code (short format):
1 Information
Result Code (long format):
<Default>
Notice: This parameter setting determines the contents of the header and trailer transmitted with
result codes and information responses.
Result codes numeric or verbose:
OK
CONNECT
RING
NO CARRIER
ERROR
NO DIALTONE
BUSY
CONNECT 2400/RLP
CONNECT 4800/RLP
CONNECT 9600/RLP
SINAUT MD720-3
C79000-G8976-C211
automatic answering deactivated <Default>
number of rings before automatically answering
0
1
2
3
4
6
7
1
1
1
SINAUT MD720-3 in Terminal Mode
<text><CR><LF>
<numeric code><CR>
<CR><LF><text><CR><LF>
<CR><LF><verbose code><CR>
Command executed, no error, Restart executed
Connection established
Ring detected
Connection not established or interrupted
Command not valid
No dialtone, dialing not possible, wrong mode
Remote station busy
Connect at 2400 bps and Radio Link Protocol
Connect at 4800 bps and Radio Link Protocol
Connect at 9600 bps and Radio Link Protocol
33