Turn Off The Camera - Pentax K20D Operating Manual

4
Press the four-way controller (5).
The Sensor Cleaning screen appears.
5
Use the four-way controller
(23) to select [Mirror Up].
6
Press the 4 button.
The mirror is locked in the up position.
If you used Dust Alert to detect dust on the sensor within the last 30
minutes, the Dust Alert image appears on the monitor. Clean the sensor
while checking the location of the dust.
7
Clean the CMOS sensor.
Use a brush-less blower to remove dirt
and dust from the CMOS sensor. Using a
blower with a brush may scratch the
CMOS sensor. Do not wipe the CMOS
sensor with a cloth.
8

Turn off the camera.

9
Attach the lens after the mirror returns to its original
position.
Downloaded From camera-usermanual.com Pentax Manuals
Sensor Cleaning
Starts mirror lockup to clean
the sensor. Turn the power off
to finish
Mirror Up
Cancel
255
OK
OK
12