Printing Images Using The Dpof Settings; Disconnecting The Cable From The Printer - Pentax Optio X Operating Manual

Printing Images Using the DPOF Settings

1
Use the four-way controller (23) to select
[DPOF AUTOPRINT] on the PictBridge menu.
2
Press the 4 button.
The Print w/DPOF Settings screen appears.
Use the four-way controller (45) to check
the images and print settings. Set the print
settings with the printing service (DPOF).
(p.128)
3
Press the 4 button.
The print settings confirmation screen appears.
4
Press the 4 button on the print settings confirmation
screen.
The images are printed according to the settings.
Press the 3 button to cancel printing.

Disconnecting the Cable from the Printer

Disconnect the cable from the printer when you have finished printing.
1
Disconnect the USB cable from the USB cradle.
2
Disconnect the USB cable from the printer.
The camera turns off automatically when the USB cable is
disconnected from the USB cradle.
Print w/DPOF settings Print w/DPOF settings Print w/DPOF settings
Copies 0 1 Date
1 0
Total
MENU OK
Print Print Print
6
135