Pentax K20D Operating Manual page 76

74
Item
14. AF by Press
Halfway
15. Superimpose AF
Area
16. AF in remote
control
17. Slow Shutter
Speed NR
4
18. High-ISO Noise
Reduction
19. Color temp. steps Sets the adjustment steps for color temperature. p.165
20. e-dial in Program Sets the e-dials in e (Hyper-program) mode.
21. e-dial in K
mode
22. e-dial in b mode Sets the e-dials in b (Shutter Priority) mode.
23. e-dial in c mode Sets the e-dials in c (Aperture Priority) mode.
24. e-dial in L & a
25. e-dial in p & M
26. Green button in
L & a
27. Illuminate LCD
panel
28. Release when
Charging
29. Flash in Wireless
Mode
30. Preview Method
Downloaded From camera-usermanual.com Pentax Manuals
Sets whether to perform AF when the shutter
release button is pressed halfway.
Sets whether to display the selected AF point
(focus position) in the viewfinder.
Sets whether to use Autofocus when shooting
with remote control.
Shutter releases after AF activates if shutter is
released from remote control when set to [On].
Shutter cannot be released until in focus.
AF does not activate at shutter release from
remote control when set to [Off].
Sets whether to allow the camera to select when
to reduce noise or to reduce noise only when
shooting at slow shutter speeds.
Sets whether to use Noise Reduction when
shooting with a high ISO. Select from three
levels.
Sets the e-dials in K (Sensitivity Priority) mode.
Sets the e-dials in L (Shutter and Aperture
Priority) mode and a (Hyper-manual) mode.
Sets the e-dials in p (Bulb) mode and M (Flash
X-sync speed) mode.
Selects the exposure adjustment method when
the Green button is pressed in L (Shutter and
Aperture Priority) mode or a (Hyper-manual)
mode.
Sets whether to illuminate the LCD panel.
Sets to release shutter while the built-in flash is
charging.
Sets the built-in flash discharge method in
wireless mode.
Sets Preview Method when the main switch is
turned to the preview position (|).
Function Page
-
p.107
-
p.80
p.80
-
-
-
-
-
-
p.95
p.29
p.137
p.146
p.113