Automatic Start/Stop Unit (A S/S Unit) - Kubota J106-STD Operator's Manual

50

AUTOMATIC START/STOP UNIT (A S/S UNIT)

AUTOMATIC START/STOP UNIT (A S/S UNIT)
To connect the machine to the A S/S UNIT the generator
is equipped with the ECTT on the left side panel of the
control panel.
To connect the exterior apparatus with the machine,
perform the following instructions;
1. Remove the terminal taps cover.
2. Connect the unit to the ECTT with the wiring
harnesses, following the operator's manual of the A
S/S unit.
3. To assemble the TTC, set the TTC, reversing the up/
down sides of the cover.
For nomenclature and connection of terminal taps are
referred to the "WIRING DIAGRAM" section . (See page
51.)
(1) Control panel
(2) Exterior connection terminal taps (ECTT)
(3) Terminal taps cover (TTC)
A For D1005, V1305 engine type the exterior connection
terminal taps are placed on the right side of control
panel.