36
AUTOMATIC START/STOP UNIT
AUTOMATIC START/STOP UNIT
To connect the machine to an auto stop/start UNIT the
generator is equipped with the ectt on the left side of the
control panel.
To connect the exterior apparatus with the machine,
perform the following instructions;
1. Remove the terminal taps cover.
2. Connect the unit to the ectt with the wiring harnesses,
following the operator's manual of an auto stop/start
unit.
3. To assemble the ttc, set the ttc.
For nomenclature and connection of terminal taps are
referred to the "WIRING DIAGRAMS" section. (See
page37)
(1) Plate
(2) Exterior connection terminal taps (ectt)
(3) Terminal taps cover (ttc)