Switch Operations; Powering On Dc Power Supplies - Nortel Passport 8306 Installation Manual

.

Switch operations

This chapter describes some of the procedures that you perform to
operate the Ethernet Routing Switch 8300 and provides troubleshooting
information.
Navigation
•
•
•
•
•
•

Powering on DC power supplies

Power on the DC power supplies to provide power to the switch.
Prerequisites
•
Procedure steps
Step
1
Copyright © 2008 Nortel Networks
.
"Powering on DC power supplies" (page 43)
"Powering on AC power supplies" (page 44)
"Resetting the switch" (page 45)
"Installing removable flash memory cards" (page 46)
"Removing removable flash memory cards" (page 47)
"Protecting memory card files" (page 48)
Ensure that the power supply is seated properly.
Action
On each DC power supply, turn the power switch to the On
position.
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
43