Nortel Passport 8306 Installation Manual page 39

Mounting the Ethernet Routing Switch 8310 and 8306 chassis in an equipment rack 39
4
5
Copyright © 2008 Nortel Networks
.
Chassis
8310
8306
Holding the chassis in position, align the flanged end of each
mounting rail with two holes on each side of the vertical rack
support.
It is easier to complete this step with two people. Make sure
that the hole pairs on either side of the vertical support match
horizontally.
Insert and tighten the rack-mounting screws with a Phillips
screwdriver.
Do not overtighten the rack-mounting screws.
Nortel Ethernet Routing Switch 8300
Installation — Chassis
NN46200-309 01.01 Standard
16 June 2008
Rack units Inches
13.2 23.06
9.7 16.9