Ip Telephone Configuration - Nortel SRG50 Configuration Manual

Survivable remote gateway

Hide thumbs Also See for SRG50:

Configuration manual (222 pages)

Configuration manual (111 pages)

Table Of Contents

100

101

102

Table of Contents

Chapter 3 Task summary

iii) For calls coming in from the private network

Configuration > Telephony > Dialing Plan > Private Network > Dialing Plan - Private

Network panel > Private Network Settings subpanel > Private Received number length

field

and

Configuration > Telephony > Dialing Plan > Private Network > Dialing Plan - Private

Network panel > Private Network Settings subpanel > Private DN length field

(Private DN length is used for DPNSS applications only. See the Networking Configuration

Guide (NN40020-603).)

Internal Reference:

External Reference: Networking Configuration Guide (NN40020-603)

Verify the line pool assignment of VoIP trunks.

In the default configuration, the VoIP trunks are assigned to line pool BlocA. Instructions in

the SRG50 Configuration Guide assume that the default configuration has been maintained.

Configuration > Telephony > Lines > Active VoIP Lines > Active VoIP Lines table > Line

Type column > Line Type field

External Reference: Networking Configuration Guide (NN40020-603)

The SRG supports four analog loop trunks on the main unit*. Verify the line pool assignment

of these trunks.

In the default configuration, these trunks are assigned to line pool A. Instructions in the

SRG50 Configuration Guide assume that the default configuration has been maintained.

Configuration > Telephony > Lines > Active Physical Lines > Active Physical Lines table

> Line Type column > Line Type field

External Reference: Networking Configuration Guide (NN40020-603)

* Category 1 countries