Installation Instructions; Test Operation - Fisher & Paykel CG604DX Installation Instructions Manual

Hide thumbs Also See for CG604DX:
Table of Contents

Advertisement

!4
AFFIX DUPLICATE DATA LABEL SOMEWHERE
ACCESSIBLE & PLUG COOKTOP IN
Duplicate data label
To check that the ignition system operates correctly, light each burner by itself, then all burners in combination.
Check for a well-defined blue flame without any yellow tipping.
If any abnormality is evident, check that the components of the burner assembly are located properly
If proper operation cannot be obtained, contact Customer Care or your nearest F&P Authorized Service Center.
The cooktop must not be used by the customer until proper operation has been achieved.

INSTALLATION INSTRUCTIONS

!6
Lifting off
Yellow tip
Note: pan supports may vary

TEST OPERATION

Good flame
!5
FIT PAN SUPPORTS
Ensure the pan supports are located securely
and in the correct orientation (refer to User guide)
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cg905dx

Table of Contents