Fisher & Paykel CG301D Installation Manual
Gas-on-glass cooktop
Hide thumbs
Also See for CG301D:
- Installation instructions manual (32 pages) ,
- Installation manual (32 pages) ,
- User manual (28 pages)
Related Manuals for Fisher & Paykel CG301D
Summary of Contents for Fisher & Paykel CG301D
- Page 1 GAS-ON-GLASS COOKTOP CG301D, CG302D, CG451D, CG603D, CG604D, CG752D, CG903D & CG905D models INSTALLATION GUIDE NZ AU 590149I 03.18...
-
Page 2: Safety And Warnings
SAFETY AND WARNINGS Before you install the appliance, please make sure that WARNING! Electrical Shock Hazard the local distribution conditions (nature of gas and pressure) and the adjustment of the ● Before carrying out any work on the electrical section of the appliance, it appliance are compatible. -
Page 3: Parts Supplied
PARTS SUPPLIED Dual Wok Pan support Pan support Mini wok Pan Small pan support (1) Wok stand (1) Fibre washer (1) (Models with a Dual Wok only) (not supplied with (some models only) support (1) Dual Wok only models) (CG604D only) Elbow 1/2“... - Page 4 GAS RATE SUMMARY-MODELS SEMI-RAPID SEMI-RAPID DUAL WOK DUAL WOK DUAL WOK SEMI-RAPID CG301D CG302D CG451D CG603D SEMI-RAPID SEMI-RAPID DUAL WOK DUAL WOK MINI WOK CG604D CG752D SEMI-RAPID SEMI-RAPID DUAL WOK SEMI-RAPID DUAL WOK DUAL WOK RAPID CG903D CG905D...
-
Page 5: Gas Rate Summary
GAS RATE SUMMARY All appliances are factory set for either Natural Gas or ULPG and are not convertible. Check the ‘Gas type’ sticker on the base of the appliance. CG301D CG302D CG451D CG603D DUAL WOK SEMI-RAPID DUAL WOK SEMI-RAPID DUAL WOK... - Page 6 PRODUCT & CABINETRY DIMENSIONS Note: Gas inlet connection is located in the rear right corner. FRONT REAR SIDE CG301D CG302D CG451D CG603D CG604D CG752D CG903D CG905D PRODUCT AND CABINETRY DIMENSIONS Overall height of product (excluding burners, dials and pan supports)
-
Page 7: Clearance Dimensions
CLEARANCE DIMENSIONS FRONT CG301D CG302D CG451D CG603D CG604D CG752D CG903D CG905D CLEARANCE DIMENSIONS Minimum clearance from left edge of cutout to nearest combustible surface Minimum clearance from right edge of cutout to nearest combustible surface Minimum clearance from rear edge of cutout to:... - Page 8 Note: Gas inlet connection is located in the rear right corner. REAR SIDE FRONT CG301D CG302D CG451D CG603D CG604D CG752D CG903D CG905D...
- Page 9 FLUSH MOUNTING INSTALLATION (OPTIONAL) ROUTER THE BENCHTOP TO THE SPECIFIED DEPTH FIT THE CLAMPING BRACKETS MASK OFF THE AREA TO BE SILICONED view from below Choose most appropriate slot for benchtop 3 mm 5 mm 16 - 50mm IF REMOVING PRODUCT, CUT AROUND THE SILICONE APPLY SILICONE WIPE OFF EXCESS SILICONE...
- Page 10 DISCARD PACKAGING REMOVE THE TWO TRANSIT SCREWS Model may vary from illustrations shown Recycle responsibly Repeat on the other side FIT THE ELBOW AND WASHER LOWER GENTLY INTO THE CUTOUT Fibre washer Elbow (1/2” BSP external thread) Floating nut...
- Page 11 FIT CLAMPING BRACKETS BASED ON THE SECURE TO BENCHTOP BENCHTOP THICKNESS view from below 16-20mm 20-30mm 30-40mm 40mm+ Repeat on all the other sides CONNECT TO GAS SUPPLY CHECK ALL CONNECTIONS FOR GAS LEAKS NG Models LPG Models Make sure to fit the supplied Make sure to fit the supplied regulator.
-
Page 12: Test Operation
INSTALLATION INSTRUCTIONS AFFIX DUPLICATE DATA LABEL SOMEWHERE FIT PAN SUPPORTS ACCESSIBLE & PLUG COOKTOP IN Ensure the pan supports are located securely and in the correct orientation (refer to User guide) Duplicate data label Model may vary TEST OPERATION To check that the ignition system operates correctly, light each burner by itself, then all burners in combination. ●... -
Page 13: Final Checklist
FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER Have you installed the clamping brackets? Have you verified that the type of model (factory-set for NG or ULPG) matches the type of gas at the site of installation? Have you used the fibre washer supplied? Have you sealed all connections with gas tape? Have you leak-tested all connections? Is the cooktop set to the correct working pressure? - Page 16 FISHERPAYKEL.COM © Fisher & Paykel Appliances 2018. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available.