Sony DCR-IP210E Operating Instructions Manual page 203

Connecting your camcorder to
your computer using the USB
cable (For Windows users)
Installing PIXELA ImageMixer
Make sure USB driver installation is complete.
You need to install PIXELA ImageMixer to view
images on your computer. Install it from the CD-
ROM supplied with your camcorder.
To install and use this software in Windows 2000
Professional, you must be authorised as Power
Users or administrators. For Windows XP, you
must be authorised as administrators.
(1) Turn on your computer and allow Windows
to load.
(2) Insert the supplied CD-ROM into the CD-
ROM drive of your computer.
The application software starts up and the
title screen appears. If the title screen does not
appear, double-click "My Computer" and
then "ImageMixer" (CD-ROM Drive). The
application software screen appears after a
while.
(3) Move the cursor to "PIXELA ImageMixer"
and click.
The Install Wizard programme starts up and
the "Select Settings Language" screen
appears.
(4) Select the language for installation.
(5) Follow the on-screen messages.
The installation screen disappears when
installation is complete.
(6) If DirectX 8.0a or later is not installed on your
computer, continue installation after installing
ImageMixer.
Follow the on-screen messages to install
DirectX 8.0a. After installation is complete,
restart your computer.
Note
The title screen is not displayed if the screen size
of your computer is set to less than 800 × 600 dots
and 256 colours or less. See page 197 about the
recommended computer environment.
Downloaded From VideoCamera-Manual.com Manuals
Подсоединение Вашей видеокамеры к
Вашему компьютеру с помощью кабеля
USB (Для пользователей Windows)
Установка программы PIXELA
ImageMixer
(1)
(2)
(3)
(4)
(5)
(6)
Примечание
×
203