Sony DCR-IP210E Operating Instructions Manual page 17

Recording a still image on a "Memory Stick"
2
Set the
POWER
switch to
MEMORY.
The
MEMORY
lamp lights
up.
Viewfinder
When the LCD panel is closed with the
LCD screen facing inwards, use the
viewfinder.
Adjust the viewfinder lens to your
eyesight (p. 41).
When you purchase your camcorder,
the clock setting is not set up yet. If
you want to record the date and time
for a picture, set the clock setting
before recording (p. 31).
Monitoring the still image on the LCD screen
(p. 174)
Note
Do not pick up your camcorder by
the LCD panel or the jack cover.
Downloaded From VideoCamera-Manual.com Manuals
POWER
4
5
1
Set the POWER switch to MEMORY or VCR.
The MEMORY or VCR lamp lights up.
2
Press PLAY or
displayed.
1
3
Press When the green z mark
PHOTO stops flashing, then lights up,
lightly. you can record a still image.
Press The image when you pressed
PHOTO PHOTO deeper will be
deeper.
recorded on a "Memory
Stick."
PB. The last recorded image is
PLAY or
(p. 144)
Remove the lens cap.
Open the LCD panel. The
picture appears on the
LCD screen.
POWER
PB
17