Install the low-profile bracket on the M.2 SSD enablement board.
b.
Install the M.2 SSD enablement board into the PCI riser cage, and then connect the SATA cable to
12.
the enablement board.
Slot 1
o
Slot 2
o
Install the PCI riser cage (on page 23).
13.
Connect the SATA cable to the SATA connector on the system board.
14.
Based on the riser cage configuration, route the M.2 SSD SATA cable in the following ways:
15.
2 LFF configuration
o
Hardware options installation 54