Table of Contents
Advertisement
Hardware options installation
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause electrostatic discharge.
Security bezel option
The security bezel helps prevent unauthorized physical access to the front panel components. Install the
security bezel and then lock it with the key provided with the kit. The security bezel is only supported in
servers that are using the quick-release latch rack ears.
Drive options
The server supports up to two LFF hot-plug or non hot-plug drives and four SFF hot-plug.
The embedded storage controller supports SATA drive installation.
For SAS drive installation, install an HPE Host Bus Adapter or an Smart Array Controller board option. For
more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
Hardware options installation 36
Hide quick links:
Advertisement
Table of Contents
