Slide the server out of the rack.
c.
After performing the installation or maintenance procedure, slide the server back into the rack, and
6.
then press the server firmly into the rack to secure it in place.
Do one of the following:
7.
In a server that uses thumbscrew rack ears, tighten the captive thumbscrews.
o
In a server that uses quick-release latch rack ears, if necessary, tighten the shipping screws.
o
Connect each power cord to the server.
8.
Connect all peripheral cables to the server.
9.
Power up the server (on page 17).
10.
Remove the server from the rack
Operations 19