Changing The System Pin; Restoring Phone To Default Setting - Gigaset E630A Setup & User Manual

Gigaset Repeater 2.0
Registering the Gigaset Repeater 2.0: 
¤
Connect the repeater to the mains power supply.
Registration/Paging key on the base (
You can register a maximum of 2 Gigaset Repeaters 2.0.
The ECO DECT function Maximum Range is activated and No Radiation is deactivated. The set-
tings cannot be changed whilst the repeater is registered.
De-registering the Gigaset Repeater 2.0:
Ï
v ¤ ¤ ¤ q System
OK

Changing the system PIN

Ï
v ¤ ¤ ¤ q System
OK
¤
If current PIN not 0000: enter current PIN
¤
Enter new system PIN (4 digits; 0 - 9)
Resetting system PIN
If you have forgotten your system PIN, you can reset it to 0000. If you do this, all the base
settings will be reset and all the handsets will be de-registered!
¤
Remove the power cord from the base.
¤
Press and hold the Registration/Paging key (
power cord to the base. 
¤
Hold the Registration/paging key for at least 5 seconds.

Restoring phone to default setting

You can reset individual modifications to base and handset settings separately.
The following are not affected by the reset:
u
Date / time,
u
Registration of handsets to the base and the current selection of the base,
u
System PIN,
u
Entries in the calendar and phonebook,
u
Redial list.
When resetting the handset (Handset Reset), audio and display settings will be deleted.
When resetting the base (Base Reset), ECO DECT, SMS, answer machine, system settings and
internal handset names, as well as call lists/answer machine lists, will be reset
Resetting the handset/base station Ï
¤ ¤ ¤
v q System
OK
Enter the system PIN
¢
page 2).
¤ ¤ q Repeater
OK
¤ ¤ q System PIN
OK
¤
¤ ¤
q Handset Reset / Base Reset
OK
¤ ¤
OK Confirm security prompt with Yes
¤
Press and hold (min. 3 secs) the
¤
The repeater registers automatically.
¤ ¤
OK
¤
OK 
¤
OK 
Save
¢
page 2) and at the same time reconnect the
Changing the system PIN
q Select repeater. ¤
¤
For Base Reset:
De-reg.
31