Configuring The System; The Web Configurator - Gigaset N670 IP PRO Installation, Configuration And Operation

Configuring the system

System settings are made via the web configurator of the N670 IP PRO and cannot be changed
using the handsets.
This applies in particular for:
•
Registering and de-registering the handset at the telephone system, handset name.
•
All settings for the VoIP account used by a handset for calls.
•
Configuration of online directories.
Handset-specific settings are preset on your handset. You can change these settings.
This applies, for example, for
•
Display settings, such as language, colour, backlight etc.
•
Settings relating to ringtones, volume, speaker profiles etc.
Information about this can be found in the user guide for the relevant handset.

The web configurator

Use the web configurator to set up your N670 IP PRO and configure your DECT network.
•
Make basic settings for the VoIP connections and register and configure the handsets you
wish to use in the DECT network.
•
Make additional settings, e.g., meet particular prerequisites for connecting the handsets to a
corporate network or adjust the voice quality on VoIP connections.
•
Save data required to access specific services on the Internet. These services include access
to online directories, as well as synchronising the date/time with a time server.
•
Save your DECT network's configuration data as files on your PC and reload these in the event
of an error. Upload new firmware, if available, and plan firmware updates at a specific date.
Starting
A standard web browser is installed on the PC/tablet.
The N670 IP PRO and the PC/tablet are directly connected to one another in a local
network. The settings of any existing firewall installed on your PC allow the PC/tablet
and the N670 IP PRO to communicate with each other.
Depending on your VoIP PBX/VoIP provider, it is possible that you will be unable to
change individual settings in the web configurator.
While you are connected to the web configurator, it is blocked to other users. Simul-
taneous access is not possible.
¤
Launch the web browser on your PC/tablet.
¤
Enter the current IP address for the Integrator/DECT manager in the address field of the web
browser (for example: http://192.168.2.10).
Configuring the system
11