Setting Up The Base; Activating/Deactivating Music On Hold; Repeater Support; System Security - Changing The System Pin - Gigaset sl910 Manual

Setting up the base

Activating/deactivating music on hold

¤
In the Settings menu (
¤
Scroll to Music on Hold.
sponding button.

Repeater support

You can increase the range and signal strength of the base using a repeater. To do
so, you must activate repeater operation. During activation, calls currently taking
place via the base are cancelled.
¤
In the Settings menu (
¤
Activate/deactivate the repeater operation with the button next to Repeater
Mode.
After activating or deactivating the repeater, switch your handset off
and on again (
Please note
u
If you use a repeater, you cannot use Eco Mode and Eco Mode+.
u
The default encrypted transmission setting is deactivated when repeater
mode is activated.
System security – Changing the system PIN
Secure the settings in the base with a 4-digit system PIN (default: 0000).
¤
In the Settings menu (
¤
Touch the ' next to System PIN.
Confirm with è.
¤
Resetting the system PIN
If you have forgotten your system PIN, you can reset it to 0000. If you do this, all the
base settings will be reset and all the handsets will be de-registered!
¤
Remove the power cord from the base.
on the base and at the same time reconnect the power cord to the base.
the register/paging key for another 2 seconds.
¢
page 24), touch [ ì Audio Settings].
¤
Activate/deactivate music on hold with the corre-
¢
page 24), touch [
¢
page 21).
¢
page 24), touch [
Ê
System].
Ê
System].
¤
Enter your system PIN (4 digits; 0–9).
¤
Press and hold the register/paging key
Setting up the base
¤
Hold
73