Using The Error Indicators - Epson DLQ-3500 Reference Manual

Using the Error Indicators

You can identify many common printer problems using the lights
on the control panel. If your printer stops working and one or
more control panel lights are on or flashing or the printer beeps,
use the following table to diagnose and fix the problem. If you
cannot fix your printer problem using this table, see "Problems
and Solutions" on page 4-3.
State of panel
lights
n Paper Out
n Pause
f Paper Out
n Pause
o Paper Out
n Pause
4-2
Troubleshooting
Beep Problem
pattern
Solution
•••
No paper is loaded in the selected paper
source.
Load paper in the selected paper source;
the Paper Out and Pause lights go off and
the printer resumes printing.
•••
Paper is not loaded correctly.
Remove and reload your paper correctly,
then press the Pause button. See "Loading
Continuous Paper" on page 1-7, "Loading
Single Sheets" on page 1-18, or "Loading
Special Paper" on page 1-21 for
paper-loading instructions.
•••
Paper is jammed in the printer.
To clear the paper jam, see "Clearing a
Paper Jam" on page 4-26.
•••
Paper is not fully ejected.
Press the Load/Eject button to eject the
sheet.
•••
The paper source is not selected correctly on
the control panel.
Select the proper paper source Then press
the Pause button.
•••
The printer cover is open.
Close the printer cover and press the Pause
button.