Epson DLQ-3500 Reference Manual page 70

Setting
Font
Manual feed wait time
Buzzer
Overlapping Forms
* This setting is available only in IBM PPDS emulation mode.
** The options available for this setting vary depending on the country.
Page length for tractor
This setting allows you to set the page length (in inches) for the
continuous paper loaded on the tractor.
Skip over perforation
This feature is available only when continuous paper is selected
as the paper source. When you turn on this feature, the printer
provides a one-inch (25.4 mm) margin between the last line
printed on one page and the first line printed on the next page.
Because most application program margin settings override
margin settings from the control panel, you should use this setting
only if you cannot set your top and bottom margins using your
application.
Auto tear-off
When auto tear-off is on and you are using continuous paper with
the tractor, the printer automatically advances the paper
perforation to the tear-off position, where you can easily tear off
the printed page(s). When the printer receives data again, it
automatically moves the paper back to the top-of-form position
and starts printing, so you can use all of the next page.
3-8
Control Panel
Options
OCR-B, Orator, Orator-S, Script C,
Roman T, Sans Serif H
0.5 second, 1 second, 1.5 seconds, 2
seconds
Off, On
Off, On