Epson DLQ-3500 Reference Manual page 144

Continuous paper
See also "Multipart forms" on page A-14 for detailed information
on the specifications for continuous multipart forms.
❏
The sprocket hole must be a circle or notched circle.
❏
The holes must be cleanly cut.
❏
If the horizontal and vertical perforations are crossed, the
shaded area below should not be printed on. Uncrossed
perforations do not have this restricted area.
B
B
1. vertical perforation
2. horizontal perforation
1. crossed perforation
2. uncrossed perforation
A-12
Product Information
1
A A
1
A 28 mm (1.1 inches)
B 3 mm (0.12 inch)
2
2