Epson DLQ-3500 Reference Manual page 148

❏
The thickness of the folded part when extended should be 2
mm or less.
* 2 mm or less
❏
The binding area should be flat and have no creases.
❏
The sprocket holes of all sheets in the form should be aligned
properly.
❏
The binding position should be outside the printable area. See
"Printable area" on page A-24 for more information.
Labels
❏
Labels should be securely attached to the backing sheet and
the label surface must be flat.
❏
The labels should not peel off their backing sheet under the
conditions below.
1. label
2. 27 mm
A-16
Product Information
wrapping drum radius
1
wrapping angle
wrapping time
ambient temperature
ambient humidity
2
27 mm
180°
24 hours
40°C
30%