Epson DLQ-3500 Reference Manual page 88

The right and left paper
guides are too far apart.
The paper is old or creased.
You may not be using the
right type of paper for the
cut-sheet feeder. For
example, your paper may be
too heavy or too light.
When the printer ejects the paper, the Paper Out flashes and
the Pause light comes on.
Cause
The printer has not fully
ejected your paper.
When you try to load single-sheet paper manually, the printer
loads the paper from the cut-sheet feeder.
Cause
The paper was not properly
loaded in the paper guide.
One page of your document is printed on two pages.
Cause
The paper size setting in
your application software
does not match the size of the
paper loaded in the printer.
4-12
Troubleshooting
Position the paper guides to match the
width of your paper.
Use only new, clean sheets of paper.
Make sure your paper meets the
requirements of your printer and
cut-sheet feeder. See
A-10 for information on
specifications.
What to do
Remove the paper by hand; the Paper
Out light goes out. Press the Pause
button to resume printing.
What to do
Load the paper in the paper guide as
"Loading single sheets from the front"
on page 1-18.
What to do
Adjust the paper size setting in your
application or the printer driver.
"Paper" on page
the paper