The Stapling Position Is Not Correct; Sheets Output To The Delivery Tray Of The Finisher Are Scattered; The Stapled Sheets Are Scattered - Sharp MX-M266N Operation Manual

Problem
Stapling does not take
place.
The stapling position
is not correct.
Sheets output to the
delivery tray of the
finisher are scattered.
The stapled sheets are
scattered.
Point to check
Is the paper type setting of the tray
selected in the printer driver set to a
paper type that cannot be stapled?
Have functions been disabled by the
administrator?
Is the stapling position set correctly?
Have the output sheets got folded?
Have the output sheets got folded?
Check the paper type settings in the machine and select
a tray that has paper that can be used for stapling*.
Click the [Tray Status] button in "Paper Selection" on
the [Paper] tab of the printer properties window and
check the paper type setting of each tray.
* Stapling is not possible on labels, tab paper,
transparency film, glossy paper or envelopes. In
addition, if "Disable Staple" is selected in the user
type, stapling will not be possible.
Check with your administrator.
Some functions may have been disabled in the system
settings (administrator).
Check the stapling position setting.
+
2. COPIER "OUTPUT" (page 2-31)
If the front and back side of the sheets in the paper feed
tray have been reversed, in some cases it can be
improved.
If the front and back side of the sheets in the paper feed
tray have been reversed, in some cases it can be
improved.
8-43
TROUBLESHOOTING
Solution
Contents