Part Names And Functions; Exterior - Sharp MX-M266N Operation Manual

BEFORE USING THE MACHINE
This section provides basic information about the machine. Please read this chapter before using the machine.

PART NAMES AND FUNCTIONS

EXTERIOR

(1)
(1) Job separator tray (Upper tray)*
Print jobs and received faxes are delivered to this tray.
(2) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
+
PLACING THE ORIGINAL
(3) Front cover
Open this cover to replace a toner cartridge.
+
REPLACING THE TONER CARTRIDGES
1-55)
(4) Output tray (center tray)
Output is delivered to this tray.
* Peripheral device.
(2) (3) (4) (5)
(page 1-40)
(page
BEFORE USING THE MACHINE
When the output tray unit is installed
When a finisher is installed
(5) Operation panel
This is used to select functions and enter the number of
copies.
+
OPERATION PANEL
(6) Exit tray unit (right tray)
When a finisher is installed, output can be delivered to
this tray.
(7) Finisher*
This can be used to staple output.
+
FINISHER (page 1-46)
1-2
(6) (7)
(page 1-7)
*
Contents