4. OPTIONAL EQUIPMENT
4.4 External Buzzer
The optional external buzzer provides a louder alert when the alarm is violated.
External buzzer
Type: OP03-136
Code no.: 000-086-443
Further, you need the optional cable assy. MJ-A7SPF0007-050C (w/7P connector, 5 m,
code no. 000-154-028-10).
1. Attach the MJ-A7SPF0007-050C cable assy. (option) to the PC/EXT-BUZZER port at the
rear of the display unit.
2. Cut the XH connector at the end of the external buzzer cable with appropriate length.
3. Solder the cables made at step 2 with MJ-A7SPF0007-050C cable as shown below.
External buzzer
4. Attach the buzzer to the mounting location with the double-sided tape or two tapping
screws (3x15 or 3x20, local supply).
Red
Soldering
Black
Connection of external buzzer and display unit
using cable assy. type MJ-A7SPF0007-050C cable
MJ-A7SPF0007-050C
Other wires should be cut off,
and wrap here with vinyl tape.
4-7