Furuno FR-8122 Installation Manual page 11

Mounting the antenna unit
The antenna unit can be mounted using the fixing holes on the outside (200x200 mm) or
inside (140x150 mm) the antenna unit.
Using outside fixing holes of the antenna housing
Use the hex head bolts (supplied) to mount the antenna unit as below.
1. Lay the corrosion-proof rubber mat (supplied) on the mounting platform.
2. Lay the antenna unit on the mounting platform, orienting it as shown in below.
Location of rubber mat
STERN
Antenna unit
CAUTION
Do not lift the Antenna unit by the
radiator; lift it by the housing.
The radiator may be damaged.
Rubber
mat
BOW
1. MOUNTING
1-3