External Buzzer (Optional Supply) - Furuno 1824C Installation Manual

2.2 External Buzzer (optional supply)

The optional external buzzer provides a louder alert when the alarm is violated.
External buzzer
Type: OP03-136
Code no.: 000-086-443
Further, you need the optional cable assy MJ-A7SPF0007-050 (w/7P connector, 5 m, code
no. 000-144-418).
1. Attach the MJ-A7SPF0007-050 cable assy (option) to the DATA 4 port at the rear of the
display unit.
2. Cut the XH connector at the end of the external buzzer cable with appropriate length.
3. Solder the cables made at step 2 with MJ-A7SPF0007-050 cable as shown below.
External buzzer
using cable assy type MJ-A7SPF0007-050 cable
4. Attach the buzzer to the mounting location with the double-sided tape or two tapping
screws (3x15 or 3x20, local supply).
Red
Soldering
Black
Other cable should be cut off,
and wrap here with tape.
Connection of external buzzer and display unit
2-4
MJ-A7SPF0007-050