Connect To A Computer - Samsung Galaxy Note 10.1 2014 User Manual

To change the Portable HotSpot password:
1. From the Tethering and Mobile HotSpot screen, tap Mobile HotSpot g
2. Tap the Security field and select WPA2 PSK.
3. With security enabled, delete the previous password and enter a new one into the Password field.
Important! The more complex the password, the harder it will be for intruders to break your security. It is
recommended that you not use names, birthdays, or other personal information.
4. Tap Save to store the new settings.
To manage connected devices:
This feature allows you to provide MAC filtering on your device. This is similar to a "VIP list" where only device on
the list are allowed access.
1. From the Tethering and Mobile HotSpot screen, tap Allowed devices g Add to add devices to the allowed for
connection list.
2. Enter the Device name and Mac address.
3. Tap OK to save the new device.

Connect to a Computer

Connect your device to a computer to transfer data between your device and the computer. Use the USB cable
that comes with your device, or use one of the pre‑loaded apps on your device to connect wirelessly.
Transfer Data
Connect your device to a computer, via USB cable, to transfer data as a Media device using MTP (Media Transfer
Protocol), or as a Camera using PTP (Photo Transfer Protocol).
1. Attach your device to the computer with a USB data cable. Your device recognizes the connection as the last
connection method you used, and displays a connection alert in the Status bar and Notifications.
2. From a Home screen, sweep your finger downward to display Notifications, then touch the alert.
3. Select a connection method:
● Media device (MTP): Transfer media files with Windows, or using Android file transfer on a Mac
(visit http://www.android.com/filetransfer/).
● Camera (PTP): Transfer photos using camera software, and transfer files to computers that do not support
MTP.
4. On your computer, choose a method for accessing your device. Available options depend on the
programs installed on your computer.
5. Transfer files to the memory card. When finished, you can disconnect the USB cable.
Settings.
Section 6: Connections 41