End Of Paper Feed - Canon iPF825 User Manual

Error Message >
There are sheets left on the
Ejection Guide.
There is a foreign object
by the Output Tray, ob-
structing the Cutter Unit.
You are not using the
printer under the recom-
mended environmental
conditions for the paper.
You are using paper that is
not compatible with auto-
matic cutting.
The Cutter Unit stops in
the middle of cutting.
In other cases, the Cutter
Unit may be damaged.

End of paper feed.

You are pressing the ▲ button on the Control Panel and trying to rewind the roll to the
edge.
13
Rel lever is in wrong position.
Cause
The Release Lever is up.
832
End of paper feed.
Messages regarding paper >
Cause
Printing will resume, starting from the page on which the error occurred.
1. Lift the Top Cover and remove the foreign object.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper
are met. Note that various environmental conditions are recommended for various
types of paper. For details on the recommended environmental conditions for paper,
see the Paper Reference Guide.
(See "Types of Paper.")
Specify Manual as the cutting method and cut the roll manually.
(See "Specifying the Cutting Method for Rolls.")
For information about paper that is compatible with automatic cutting, see the Paper
Reference Guide.
(See "Types of Paper.")
If the Carriage is out, move the Carriage out of the way, away from the paper.
If the Cutter is out, move the Cutter to the right side (away from the paper) and re-
move the jammed paper.
(See "Clearing Jammed Roll Paper.")
If the paper cannot be cut using the Cutter Unit, specify Manual as the roll cutting
method and cut the roll manually.
(See "Specifying the Cutting Method for Rolls.")
Contact your Canon dealer for assistance.
Lower the Release Lever.
If the error occurs again, turn off the printer and wait a while before restoring power.
Corrective Action
→P.578
→P.578
Cause
Corrective Action
→P.606
→P.786
→P.606
Corrective Action
Release the ▲ button.
iPF825