Canon iPF825 User Manual page 357

12.
The Add Plotter - Ports screen opens.
Make sure that Plot to a port is selected, select the port that you want to use for the plotter, then click the Next
button.
Note
• In the Add Plotter - Ports screen, it is recommended to select Network Port. If you select Local
Port, the AutoCAD warning message may appear when printing.
13.
The Add Plotter - Plotter Name screen opens. Click the Next button.
Note
• You can change the Plotter Name setting here, but you will normally leave it as it is and go to
Step 14.
iPF825
Windows Software > HDI Driver
Installing with the Canon Installer
>
4
341