Canon iPF825 User Manual page 630

Handling Paper
2.
Use a type of paper that matches the print job.
When both or neither loaded roll matches the type of paper in the print job, the third condition determines which
roll is used.
3.
If Roll Switching in the printer menu is set to No RollSwitching, the currently advanced roll is used.
If Roll Switching in the printer menu is set to Use Optimal Size, the fourth condition determines which roll is
used.
4.
When the print job calls for borderless printing, the roll compatible with borderless printing is used.
When the print job does not specify borderless printing, or if both rolls are compatible with borderless printing,
the fifth condition determines which roll is used.
5.
Use a size of paper that matches the width specified in the print job.
7
When both loaded rolls match the width of paper in the print job or the width is not specified in the job, the sixth
condition determines which roll is used.
When Width Detection is set to Off, the seventh condition determines which roll is used.
6.
Use a size of paper that accommodates the width specified in the print job.
When both loaded rolls can accommodate the width specified in the print job, the seventh condition determines
which roll is used.
7.
The roll closest to the roll width specified in the print job is used.
614
If both rolls are equally close to the specified width, the currently advanced roll is used.
Automatic Roll Switching
> Handling rolls >
Note
• When Detect Mismatch in the printer menu is set to Warning or None, the roll is determined by
the following conditions.
• When neither loaded roll matches the type of paper in the print job and Detect Mismatch in the
printer menu is set to Pause, an error message is displayed.
Note
• If neither roll is compatible with borderless printing, an error message is displayed.
Note
• When neither loaded roll matches the width specified in the print job, an error message is dis-
played.
Note
• When Detect Mismatch in the printer menu is set to Warning or None, the roll is determined by
the following conditions.
• When neither loaded roll is wide enough for the print job and Detect Mismatch in the printer
menu is set to Pause, an error message is displayed.
iPF825