Roll Paper Cannot Be Inserted Into The Paper Feed Slot - Canon iPF825 User Manual

8.
In a crouching position, push the Roll Unit in.
9.
Position the Wheeled Output Stacker by the printer. (See "Using the Wheeled Output Stacker.")
10.
Turn the printer on. (See "Turning the Printer On and Off.")

Roll Paper Cannot be Inserted into the Paper Feed Slot

Cause
The roll paper is warped.
If paper cannot be advanced from Roll 2 (Low-
er), the Roll Unit Cable is disconnected.
Cannot Load Sheets
Cause
The paper source selection is incorrect.
Paper is not cut straight
The paper is bent or curled at the cut position.
Paper rises by the ends of the cut position before it is cut.
Paper is not cut
In the printer driver, No or Print Cut Guideline is specified
in Auto Cut.
iPF825
Straighten out curls and reload the roll.
Connect the Roll Unit Cable firmly to the Roll Unit Power Sup-
ply Inlet and the inlet on the roll unit.
Press the Feeder Selection button to activate the Cut Sheet lamp.
Cause
Cause
Troubleshooting > Problems Regarding Paper
→P.652
Corrective Action
Corrective Action
Corrective Action
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Corrective Action
Specify Yes in Auto Cut in the printer driver.
Roll Paper Cannot be Inserted into the Paper Feed Slot
>
→P.623
12
795