Machine Status Messages - Brother HL-S7000DN User Manual

General Information

Machine status messages

The following table shows the machine status messages during normal operation:
Machine Status Message
Cooling Down
Job Cancel (All)
Cancel Printing
Ignore Data
Pause
Please Wait
Printing
Ready
Sleep
1
Deep Sleep
1
When the Wireless Network is enabled or an optional card reader is connected, the machine does not transfer to Deep Sleep mode. If you want
to disable the Wireless Network, change the setting of WLAN Enable to Off. (See Network Menu uu page 84.)
Meaning
The machine is cooling down.
The machine is canceling the job.
The machine is ignoring data processed using the PS driver.
The machine has suspended its operations. Press Go to start the machine
again.
The machine is starting.
The machine is carrying out the calibration process.
The machine is printing.
The machine is ready to print.
In Sleep mode (power save mode) the machine acts as though it were turned
off, but the machine can still receive data. Receiving a print job will
automatically wake up the machine to start printing.
In Deep Sleep mode (reducing more power consumption than Sleep mode),
the machine acts as though it were turned off. If the machine does not receive
data for a certain length of time while it is in Sleep mode, it enters Deep Sleep
mode automatically.
3
3
76