Brother HL-S7000DN User Manual page 148

Troubleshooting
Other difficulties
Difficulties
The machine will not turn on.
The machine cannot print EPS
data that includes binary with
the BR-Script3 printer driver.
The ink cartridge runs out
soon after replacing it, and a
message is displayed
prompting you to replace the
ink cartridge.
Cannot open the machine's
top cover.
The machine continues to
operate after printing.
1
Printer properties for Windows
Suggestions
Adverse conditions on the power connection (such as lightning or a power surge)
may have triggered the machine's internal safety mechanisms. Turn the machine off
and unplug the power cord. Then plug in the power cord.
If the problem is not solved, turn off the machine. If you are using a power breaker,
disconnect it to make sure it is not the problem. Plug the machine's power cord
directly into a different known working electrical socket. If there is still no power, try
a different power cable.
®
(Windows
)
You need the following settings to print EPS data:
a
®
For Windows 7 and Windows Server
Click the button and Devices and Printers.
For Windows Vista
Click the button, Control Panel, Hardware and Sound, and then
Printers.
®
For Windows XP and Windows Server
Click the Start button, and select Printers and Faxes.
b
Right-click the Brother HL-S7000DN BR-Script3 icon and select Properties
Click Brother HL-S7000DN BR-Script3 if necessary.
c
From the Device Settings tab, choose TBCP (Tagged binary communication
protocol) in Output Protocol.
(Macintosh)
If your machine is connected to a computer with a USB interface, you cannot print
EPS data that includes binary. You can print the EPS data if the machine is
connected to a network. For installing the BR-Script3 printer driver through the
network, visit the Brother Solutions Center at http://solutions.brother.com/.
Make sure you are using Brother Original Ink.
The machine's top cover may be locked if you disconnect the power cord during
printing. To unlock the cover, connect the power cord to the electrical socket, and
wait for the machine to enter standby mode.
When printing has finished, the machine will operate for a short time to keep the print
head from drying out and to maintain print quality. You can print even if the machine
is in this maintenance mode.
® ®
7 and Windows Server 2008 R2 users
®
2008 R2:
® ®
and Windows Server 2008:
®
2003:
6
1
.
142