Brother HL-S7000DN User Manual page 72

Driver and Software
Media Type

You can change the media type to one of the following:
• Plain Paper
• Thin Paper
• Thick Paper
• Bond Paper
• Recycled Paper
 Slow Drying Paper
When using paper that dries slowly, select this option to prevent bleed-through.
This mode cannot be used when Ink Save Mode has been selected or when the Density Adjustment has
been altered.
 Output Tray
You can select the following paper output trays:
• Auto Select
• Standard
1
• Optional
1
Available if the optional output tray is installed.
 Ink Save Mode
You can conserve ink using this feature. When you check Ink Save Mode, printed items appear lighter.
The default setting is Off.
This mode cannot be used when Slow Drying Paper has been selected.
 Sleep Time [Min.]
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will
be reset to the specific time set at the machine; this can be altered in the driver. If you want to change the
Sleep Time, choose 2, 10 or 30.
While the machine is in Sleep Mode, the LCD shows Sleep, but the machine can still receive data.
Receiving a print job will automatically wake up the machine to start printing.
 High Quality Image Printing
You can improve the print quality. If you set High Quality Image Printing to On, the print speed will be
slower.
2
66