Brother HL-S7000DN User Manual page 38

Driver and Software
Booklet

Use this option to print a document in booklet format using duplex printing; it will arrange the document
according to the correct page number and allows you to fold at the centre of the print output without having
to change the order of the page number.
When you choose Booklet, the Duplex Settings button becomes available to choose. You can set the
following settings in the Duplex Settings dialog box.
• Duplex Type
There are two types of duplex binding directions available for each orientation.
Portrait
Left Binding
• Booklet Printing Method
When Divide into Sets is selected:
This option allows you to print the whole booklet as smaller individual booklet sets; it still allows you to
fold at the center of the smaller individual booklet sets without having to change the order of the page
numbers. You can specify the number of sheets in each smaller booklet set, from 1 to 15. This option
can help when folding a printed booklet that has a large number of pages.
• Binding Offset
When you check Binding Offset, you can also specify the offset for binding in inches or millimetres.
Paper Source
You can choose Auto Select, Tray1, Tray2
Tray ID 3 or Tray ID 4 and specify separate trays for printing the first page and for printing from the second
page onwards.
1
Available if this optional lower tray is installed.
Output Tray
You can select the following paper output trays:
 Auto Select
 Standard
1
 Optional
1
Available if the optional output tray is installed.
Right Binding
1 1
, Tray3 , Tray4
Landscape
Top Binding
1
, MP Tray, Manual, Tray ID 1, Tray ID 2,
Bottom Binding
2
2
2
32