Led Indications; Machine Status Messages - Brother HL-5470DW User Manual

General Information

LED indications

The LEDs are lights which show the machine status.
Data LED (Green)
LED indication
On
Blinking
Off
Error LED (Orange)
LED indication
Blinking
Off

Machine status messages

The following table shows the machine status messages during normal operation:
Machine Status Message
Cooling Down
Cancel Printing
Cancel All Jobs
Ignore Data
Pause
Please Wait
Printing
Ready
Sleep
1
Deep Sleep
2
Power Down
1
When the Wireless Network is enabled the machine does not transfer to Deep Sleep mode. If you want to disable the Wireless Network, change
the setting of WLAN Enable to Off. (See Network Menu uu page 86.)
2
Middle East and Africa only
Meaning
Data is in the machine's memory.
The machine is receiving or processing data.
There is no remaining data in the memory.
Meaning
There is a problem with the machine.
There is no problem with the machine.
Meaning
The machine is cooling down.
The machine is canceling the job.
The machine is ignoring data processed using the PS driver.
The machine has suspended its operations. Press Go to start the machine
again.
The machine is warming up.
The machine is carrying out the calibration process.
The machine is printing.
The machine is ready to print.
In Sleep mode (power save mode) the machine acts as though it were turned
off, but the machine can still receive data. Receiving a print job will
automatically wake up the machine to start printing.
In Deep Sleep mode (reducing more power consumption than Sleep mode),
the machine acts as though it were turned off. If the machine does not receive
data for a certain length of time while it is in Sleep mode, it enters Deep Sleep
mode automatically.
The machine is in Power Down mode.
3
3
3
3
3
76