System Routing Table - TP-Link TL-WR810N User Manual

2. Enter the following data.
 Destination Network - The Destination IP Address is the address of the network or host
that you want to assign to a static route.
 Subnet Mask - The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.
 Default Gateway - This is the IP Address of the gateway device that allows for contact
between the Router and the network or host.
3. Select Enabled or Disabled for this entry on the Status drop-down list.
4. Click the Save button to make the entry take effect.
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next
button to view the information in the next screen.

4.14.2 System Routing Table

Choose menu "Advanced Routing → System Routing Table", and you can views all of the
valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface will
be displayed for each entry.
TL-WR810N
Figure 4-70 Add or Modify a Static Route Entry
Figure 4-71 Routing Table
300Mbps Wireless N Mini Router
- 85 -