TP-Link TL-WR810N User Manual page 41


Dynamic IP - Your ISP uses a DHCP service to assign your Router an IP address for
connecting to the Internet. When the Router connects to a DHCP server, or the ISP
supplies you with DHCP connection, please choose this type. If you choose this type of
connection, no configuration should be set and you can go on with the wireless
configuration in
Figure 3-30

Static IP - In this type, you should fill in the IP address, Subnet Mask, Default Gateway,
and DNS IP address manually, which are specified by your ISP. Then click Next and
proceed to Figure 3-30.

PPPoE/Russian PPPoE - If you have applied ADSL to realize Dial-up service, you
should choose this type. Under this condition, you should fill in both the User Name and
Password that the ISP supplied. Then click Next and proceed to Figure 3-30.

L2TP/Russian L2TP - In this type, you should fill in the username, password and IP
address/Domain name of VPN Server. Then click Next and proceed to Figure 3-30.
TL-WR810N
.
Figure 3-26 Quick Setup - Static IP
Figure 3-27 Quick Setup - PPPoE
- 25 -
300Mbps Wireless N Mini Router