System Routing Table; Bandwidth Contrai; Control Settings - TP-Link TL-WR841N User Manual

Chapter4 Configure
3. Select Enabled or Disa bled for this entry on the Status drop-down list.
4. Click Save.
Vou can also do the following operations to modify the current settings.
• Click Delete to delete the entry.
• Click Enable Ali to enable all the entries.
• Click Disable Ali to disable all the entries.
• Click Delete Ali to delete all the entries.
• Click Previous to view the information on the previous screen and Next to view the
information on the next screen.
4. 11. 2. System Routing Table
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced Routing
>
System Routing Table, and you can view all the valid
route entries in use.
System Routing Table
ID Destination Network
192 1680.0
239.0.0.0
Subnet Mask
255.255.255 0
255.0.0.0
[ Refresh
J
Gateway Interface
0.00.0 LAN &WLAN
0.0.0.0 LAN &WLAN
• Destination Network - The Destination Network is the address of the network or host
to which the static route is assigned.
• Subnet Mask - The Subnet Mask determines which portion of an IP address is the
network portion, and which portion is the host portion.
• Gateway - This is the IP address of the gateway device that allows for contact between
the Router and the network or host.
• Interface - This interface tells you whether the Destination IP Address is on the LAN &
WLAN (internai wired and wireless networks), or the WAN (Internet).
• Click Refresh to refresh the data displayed.
4. 12. Bandwidth Control
4. 12. 1. Contrai Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
51