Wireless; Wireless Settings - TP-Link TL-WR810N User Manual

Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.
 IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allows your devices
in LAN can watch TV.

Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2. If the new LAN IP Address you set is not in the same subnet with the previous one, the IP
Address pool in the DHCP server will be configured automatically， while the Virtual Server and
DMZ Host will not take effect until they are re-configured.

4.7 Wireless

Figure 4-17 Wireless menu
There are five submenus under the Wireless menu (shown in Figure 4-17): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click
any of them, and you will be able to configure the corresponding function.

4.7.1 Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
Wireless Network Name - Enter a string of up to 32 characters. The same name of SSID

(Service Set Identification) must be assigned to all wireless devices in your network. The
default SSID is set to be TP-LINK_XXXX (XXXX indicates the last unique four numbers of
each Router's MAC address). But it is recommended strongly that you change your
TL-WR810N
Figure 4-18 Wireless Settings - Router
- 47 -
300Mbps Wireless N Mini Router