TP-Link TL-WR810N User Manual page 33

300mbps wireless n mini router
Hide thumbs Also See for TL-WR810N:
Table of Contents

Advertisement

network. The default SSID is set to be TP-LINK_XXXX (XXXX indicates the last unique
four numbers of each Router's MAC address). But it is recommended strongly that you
change your networks name (SSID) to a different value. This value is case-sensitive.
For example, TEST is NOT the same as test.
Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without encryption. It is
recommended strongly that you choose one of following options to enable security.
WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase.
PSK Password - You can enter ASCII or Hexadecimal characters.
For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the
length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case
keys will affect the outcome. It would also be a good idea to write down the key and
all related wireless security settings.
No Change - If you chose this option, wireless security configuration will not change!
More Advanced Wireless Settings - If you check this option, you can set the
configuration of Mode, Channel and Channel Width.
Mode - This field determines the wireless mode which the Router works on.
Channel Width - The bandwidth of the wireless channel.
Channel - This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point. If you select auto, then the AP will select the best channel
automatically.
These settings are only for basic wireless parameters. For advanced settings, please refer to
4.7 Wireless.
3.
The Finish page is shown as Figure 3-13. Click the Finish button to make your wireless
configuration take effect and finish the Quick Setup.
TL-WR810N
Figure 3-13 Quick Setup - Finish
- 17 -
300Mbps Wireless N Mini Router

Advertisement

Table of Contents
loading

Table of Contents