TP-Link TL-WR810N User Manual page 120

To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and device using either Push Button Configuration (PBC)
method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
example.
II. By PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Method One:
Step 1: Keep the WPS Status as Enabled and click the Add Device button in Figure 5-3, then
the following screen will appear.
Choose "Press the button of the new device in two minutes" and click Connect.
Step 2:
For the configuration of the wireless adapter, please choose "Push the button on my
Step 3:
access point or wireless router" in the configuration utility of the WPS as below, and
click Connect.
TL-WR810N
Figure 5-4 Add A New Device
- 104 -
300Mbps Wireless N Mini Router