Memo Pads - Icom IC-7850 Instruction Manual

■ Memo pads

The transceiver has a Memo Pad function to store fre-
quency and operating mode for easy write and recall.
The Memo pads are separate from memory channels.
The default quantity of Memo pads is 5. However, this
can be increased to 10 in the Others set mode, if de-
sired. (p. 15-15)
Memo pads are convenient when you want to tempo-
rarily memorize a frequency and operating mode, such
as when you find a DX station in a pile-up, or when a
desired station is busy for a long time and you want to
temporarily search for other stations.
• The function can be used in both the VFO and memory
modes.
Use the transceiver's Memo pads instead of relying on
hastily scribbled notes that are easily misplaced.
D Entering frequencies and operating modes into Memo pads
You can easily write the accessed readout frequency
and operating mode by pushing [MP-W].
When you enter a 6th memo pad, the oldest memo
pad is automatically erased to make room for the new
entry.
Each Memo pad must have its own unique combi-
nation of frequency and operating mode. Memo
pads having identical settings cannot be entered.
The function is commonly used for the Main and Sub
bands.
In this example, 21.276 MHz (USB) will be erased
when 7.067 MHz (LSB) is entered.
11-7
MEMORY OPERATION
[MP-W]
MP-W
Newest content
Oldest content
Erased
11