I Memo Pads; Memory Operation - Icom IC-910H Instruction Manual

6

MEMORY OPERATION

I Memo pads

The IC-910H has a memo pad function for each fre-
quency band to store frequency and operating mode
for easy write and recall. The memo pads are separate
from memory channels.
The default number of memo pads is 5, however, this
can be increased to 10 in the memo pad set mode
(p. 64) if desired.
Memo pads are convenient when you want to memo-
rize a frequency and operating mode temporarily, such
as when you find a DX station in a pile-up, or when a
desired station is busy for a long time and you want to
temporarily search for other stations.
VFO or memory mode
FM
When [MPW 8] is pushed, "FM 145.9200 MHz"
is programmed and the oldest memo pad is
cleared.
◊ Calling up a frequency from a memo pad
You can simply call up the desired frequency and op-
erating mode of a memo pad by pushing [MPR 9].
• Both VFO and memory modes can be used.
• The frequency and operating mode are called up, starting
from the most recently written.
VFO or memory mode
FM
44
VFO A
VFO A
From The N3UJJ.COM Document Library From The N3UJJ.COM Document Library
Use the transceiver's memo pads instead of relying on
hastily scribbled notes that are easily misplaced.
◊ Writing frequencies and operating
modes into memo pads
You can simply store the accessed readout frequency
and operating mode by pushing [MPW 8].
When you write a 6th (or 11th) frequency and operat-
ing mode, the oldest written frequency and operating
mode are automatically erased to make room for the
new settings.
Each memo pad must have its own unique combi-
nation of frequency and operating mode; memo
pads having identical settings cannot be written.
Memo pad contents
USB
FM
USB
FM
CW
Memo pad contents
USB
FM
USB
FM
CW
Cleared