Dhcp Client List - TP-Link TL-WR810N User Manual

Secondary DNS (Optional) - Input the IP address of another DNS server if your ISP

provides two DNS servers.

Note:
1. To use the DHCP server function of the Router, you must configure all computers on the LAN
as "Obtain an IP Address automatically". This function will take effect until this device reboots.
When you choose the Smart IP (DHCP) mode in Network → LAN, the DHCP Server
2.
function will be disabled. You will see the page as below.

7.6.2 DHCP Client List

Choose menu "DHCP → DHCP Client List", and then you can view the information about the
clients attached to the Router in the screen as shown in Figure 7-16.
Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the Router has allocated to the DHCP client

Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,

a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.
TL-WR810N 300Mbps WiFi Pocket Router/AP/TV Adapter/Repeater
Figure 7-15 DHCP Settings
Figure 7-16 DHCP Clients List
- 173 -