Working Mode - TP-Link TL-WR810N User Manual


Note:
The default PIN code of the AP can be found in its label or the WPS configuration screen.
You will see the Connect successfully screen when the new device has successfully connected
to the network.

Note:
1) The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2) The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.

5.5 Working Mode

The Router supports five operation mode types: Wireless Router, Access Point, Repeater,
Client and Wireless Client Router. Please select one you want. Click Save to save your choice,
which is shown as Figure 5-6.
Standard Wireless Router - In this mode, the device enables multiple users to share the

Internet connection via ADSL/Cable Modem. The LAN devices share the same IP from ISP
through Wireless port. While connecting to Internet, the LAN/WAN Ethernet port works as a
WAN port at Standard Wireless Router mode.
TL-WR810N 300Mbps WiFi Pocket Router/AP/TV Adapter/Repeater
The WPS Configuration Screen of Wireless Adapter
Figure 5-6 Working Mode Settings
- 103 -