Ping Watch Dog - TP-Link TL-WR810N User Manual

Click Start to check the connectivity of the Internet.
The Diagnostic Results page displays the result of diagnosis.
If the result is similar to the following screen, the connectivity of the Internet is fine.

Note:
Only one user can use this tool at one time. Options "Number of Pings", "Ping Size" and "Ping
Timeout" are used for Ping function. Option "Tracert Hops" are used for Tracert function.

6.8.2 Ping Watch Dog

Choose menu "System Tools → Ping Watch Dog", and then you can see the following screen.
The Ping Watch Dog is dedicated for continuous monitoring of the particular connection to
remote host using the Ping tool. It makes this device continuously ping a user defined IP address
(it can be the internet gateway for example). If it is unable to ping under the user defined
constraints, this device will automatically reboot.

Enable - Turn on/off Ping Watch Dog.

IP Address - The IP address of the target host where the Ping Watch Dog Utility is sending
ping packets.

Interval - Time interval between two ping packets which are sent out continuously.

Delay - Time delay before first ping packet is sent out when this device is restarted.
TL-WR810N 300Mbps WiFi Pocket Router/AP/TV Adapter/Repeater
Figure 6-31 Diagnostic Results
Figure 6-32 Ping Watch Dog Utility
- 155 -